PRESS ROOM

Walk for Water
Veris Joins and Sponsors Walk for Water

Veris has joined forces with GF Piping Systems in support of Walk for Water, an initiative of WaterMission.org. On October 22nd participants set out on a 3 mile round trip journey with an empty bucket, and return with water for events at the starting line.

Read More »
AS9100C:2009 Recertified
AS9100C:2009 Recertified September 2016

October 12, 2016 -- Veris has now completed the recertification process on AS9100C:2008 with zero nonconformances found! This is the current international standard containing requirements for establishing and maintaining a quality management system, in addition to further requirements for the aviation, space, and defense industries.

Read More »
Veris Doubles Up on Box Build Assembly Stations Sept 2016
Veris Doubles Up on Box Build Assembly Stations

September 2016 -- With the initial introduction of the mechanical box build assembly work cells in June proving successful in improving both efficiency and team member comfort, we've added another one!

Read More »
Veris Mfg 9/11 Day of Remembrance Sept 2016
Veris Joins 9/11 Day of Service and Remembrance 2016

September 2016 -- On the morning of Friday, Sept. 9th a team of Veris volunteers joined an ongoing week long event focused on "Remembrance through Service" with the Orange County Rescue Mission.

Read More »
Employee Appreciation Day
Employee Appreciation

August 2016 -- In appreciation of our staff's hard work and daily commitment to quality, all Veris employees were treated to enjoy some cool, refreshing ice cream on a beautiful hot August day!

Read More »
New Reflow Ovens from Heller Industries
Veris Acquires Latest Technology: 3 New Reflow Ovens from Heller Industries

August 2016 -- The Heller 1809 Mark III Lead Free reflow ovens are the latest capital equipment implementation to complete the already top of the line SMT capabilities that exist at Veris Mfg. Having the latest technology ovens across all 3 SMT lines makes all assembly lines virtually mirror images, allowing for greater flexibility which support high mix/high volume throughputs with greater quality reflow profile soldering.

Read More »
U-shape workcells
Veris Introduces More U-Shape Workcells

July 2016 -- Veris has introduced another Lean Manufacturing initiative with the acquisition of mechanical "box build" assembly work cells. The U-Shape workcells are ergonomically functional and allows for the flow of product from the introduction of pre-assembled CCA's (circuit card assemblies) on one end, that progress into the HLA's (higher level assemblies) and come out as finished mechanical assemblies at the other end.

Read More »
David Callaghan
Veris Welcomes David Callaghan as New Outside Sales Representative

July 2016 -- David's printed circuit board experience spans over 35 years, having excelled in various positions including Production Manager, General Manager, and Director of Operations and Sales. The majority of David's work experience has dealt directly with the building of printed circuit boards, focusing on improved manufacturing throughput, organization, and motivating people to succeed.

Read More »
Veris Mfg employee investment
Employee Investment

July 2016 -- We wanted to celebrate our hard working team members that recently re-certified to IPC-610, IPC-600 and J-STD-001!

Read More »
Veris Mfg Employee Investment
Veris Acquires new FiSNAR 4400N.1 Underfill and Epoxy Dispensing System

June 2016 -- Veris introduces our new Fisnar 4400N.1 dispensing system to address the Underfill process on Flip Chip, CSP, and BGA devices assembled onto Rigid and Rigid-Flex substrates.

Read More »
Veris Mfg Employee Investment
Veris Utilizes Interposer and Adapter Solutions in Solving Obsolescence Issues

June 2016 -- Interposer substrates are used to attach components as an intermediate process step by directly attaching to a main/motherboard. An interposer board can be used to solve any number of issues, most commonly as an interface to adapt obsolete components to a legacy circuit board that cannot be redesigned or is impractical to redesign.

Read More »
Veris Mfg Employee Investment
Veris Manufacturing welcomes Ray Avalos to our management team as the new Director of Manufacturing and Engineering

June 2016 -- Ray’s qualifications and 20+ years of experience in the EMS industry makes him a strong asset to Veris Manufacturing. Ray is an Engineering Professional with solid experience and proven track record in Military, Aerospace, Medical, Commercial and Industrial products within fast paced contract manufacturing environments.

Read More »
Sandra Martinez enlists
Veris Quality Engineer Sandra Martinez enlists in National Guard reserves

April 2016 -- Sandra has been a member of our Veris team since June of 2014. Having made the brave decision to enlist in the National Guard reserves, Sandra has now chosen to take her strength and discipline to the next level. Basic training began in South Carolina on April 1, 2016 which will be followed by aircraft electrician schooling.

Read More »
Operation Gratitude
Veris Family Sends Support to U.S. Service Members Through Operation Gratitude

April 2016 -- On April 22nd Veris Manufacturing joined the ranks of those who have put their support for the troops into action through Operation Gratitude. A team of 12 employees went to support Operation Gratitude and produced 257 Paracord “Survival” Bracelets, which and be used to hold up to 550 pounds.

Read More »
New OKI APR 5000XLS BGA Rework Station
Veris Continues to Upgrade Equipment, Acquiring New OKI APR 5000XLS BGA Rework Station

April 2016 -- The APR 5000 is a compact work station that will allow for quick and precise rework and reflowing of circuit boards. This allows for specific components to be removed or replaced using simple and completely customizable operation profiles.

Read More »
SEICA Pilot Flying Probe Tester
SEICA Pilot Flying Probe Tester Joins the New Equipment at Veris Manufacturing

March 2016 -- The SEICA Pilot Flying Probe performs In-circuit tests in which an electrical probe tests an already populated printed circuit board in order to check for shorts, capacitance, resistance, and other measures that ensure the board was fabricated correctly.

Read More »
ISO 13485 recertification
Veris Manufacturing receives ISO 13485 recertification with zero nonconformances found

February 2016 -- Upon completion of an external audit of Veris’ compliance with international quality standards, Veris Manufacturing achieved recertification of international standard ISO 13485 without a single nonconformance. ISO 13485 is the current international standard for medical device and component manufacturers in implementation of a system for quality management.

Read More »
Program Manager Regina Kim achieves IPC CEPM Certification

December 2015 -- Regina Kim has become a Certified EMS Program Manager after traveling to San Jose, California to complete the final course and subsequent exam of the IPC’s three part educational program. This certification serves as evidence of Regina’s notable experience, and capability in dealing with the many challenges present within the EMS (Electronic Manufacturing Services) field.

Read More »
Veris Manufacturing receives ISO 13485 recertification -Zero nonconformance’s found!

Upon completion of an audit of Veris’ compliance with international quality standards, Veris Manufacturing achieved recertification of international standard ISO 13485 without a single nonconformance. ISO 13485 is the current international standard for medical device and component manufacturers in implementation of a system for quality management. Compliance with this standard ensures a commitment to meeting customers’ needs for quality products.

Read More »
Always Hiring New Team Members - September 2014

The addition of these employees will bring the experience needed to strengthen our company and continue to provide unrivaled service for our customers.

Read More »
Veris Manufacturing celebrates another record month - August 2014

On August 11th Veris celebrated another record month in July with a company BBQ. Veris rewarded its employees for their unprecedented efficiencies that made this achievement possible. Veris hosted the event, where management grilled burgers and hotdogs for all to enjoy!

Read More »
Veris Manufacturing Achieves ISO13485

Veris has been working with ABS Quality Evaluations in order to gain their ISO 13485 Certification. Veris believes continuous improvement is the only way to thrive and persevere in this industry.
ISO 13485 represents the requirements for a comprehensive management system to help aide and perfect the manufacturing of medical devices.

Read More »
At the start of 2013, following another profitable year, Veris Manufacturing invested in more cutting edge equipment upgrades!

With steady, continuous growth and positive results day in and day out, Veris is always dedicated to improving their efficiency, quality, and technology.
With this in mind, Veris Manufacturing purchased two DEK Printers as well as a new High-Speed Modular Mounter FX-2 SMT Machine.

Read More »
Veris Manufacturing engaged in a working relationship with Moss Adams, LLP

In January 2012, Veris Manufacturing engaged in a working relationship with Moss Adams, LLP. Due to the recent growth of the company, management felt it was necessary to equip themselves with a highly-visible, world class accounting firm.
We felt this change was necessary not only based on the rapid growth of Veris Manufacturing, but to assure our customers and suppliers alike that our growth is organic and that we are financially prepared to whether economic downturns.

Read More »
Veris Manufacturing Sponsers KAMSF Golf Tournament

For the second consecutive year, Veris manufacturing sponsors the annual Kevin Armstrong, M.D Memorial Sport Foundation Golf Tournament.
CEO Bill Mcilvene and President Jay Cadler attended the event at Mile Square Park Golf Course on April 2, 2012. This is the second consecutive year Veris has been a participating sponser for their beloved charity.

Read More »
Veris Manufacturing Receives 2012 Best of Anaheim Award

For the second consecutive year, Veris manufacturing has been selected for the 2012 Best of Anaheim Award in the Electronic Manufacturing Services category by the U.S. Commerce Association (USCA).
The USCA "Best of Local Business" Award Program recognizes outstanding local businesses throughout the country. Each year, the USCA identifies companies that they believe have achieved exceptional marketing success in their local community and business category. These are local companies that enhance the positive image of small business through service to their customers and community.

Read More »
Reach Readiness

In our efforts to always stay on top of industry trends and topics affecting electronics, Veris gets ready for REACH compliance. The European Union's (EU) Registration, Evaluation and Authorization of Chemicals (REACH) regulation puts responsibility on manufacturers, importers, and downstream users to register the chemicals in products that are sold in the EU.

Read More »
Veris Launches New Website

Veris Manufacturing is proud to display their new website to the public. After months of working closely with In10sity out of Tennessee, Veris has officially launched their new website. We plan on keeping this site filled with information current and ever evolving.

Read More »